215015
186
Revision A
1029827
A
B
Figure 6.38: Safety Prop
13. Engage the safety props on both lift cylinders as follows:
a.
Shut down the engine, and remove the key from the
ignition.
b.
Pull lever (A) and rotate towards the header to release
and lower safety prop (B) onto the lift cylinder.
c.
Repeat for opposite lift cylinder.
1000771
A
B
C
D
Figure 6.39: Header Leg
14. Install pin (B) through the header leg (engaging U-bracket in
lift linkage) on both sides and secure with hairpin (A).
15. Raise header stand (D) to storage position by pulling spring
pin (C) and lifting stand into uppermost position. Release
spring pin.
