215015
219
Revision A
Attaching an R Series or R1 Series Header: Mechanical Center-Link
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
1021748
A
B
C
Figure 6.118: Header Support
2.
Remove hairpin (B) from clevis pin (A) and remove clevis
pin from the header supports (C) on both sides of the
header.
1029714
A
B
Figure 6.119: Header Float Linkage
CAUTION
To prevent damage to the lift system when lowering header lift
linkages without a header or weight box attached to the
windrower, ensure the float engagement pin is installed in
storage position (B) and NOT in engaged position (A).
1008925
A
Figure 6.120: Ground Speed Lever
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Before starting engine, remove protective cover from
exhaust stack.
3.
Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract header lift
cylinders.