215015
72
Revision A
1005718
A
B
Figure 3.91: Radio and Support
11. Attach stud (supplied with radio) to center rear of radio.
12. Attach support (B) to stud on back of radio chassis with
nut (A) and lock washer supplied with the support.
NOTE:
Support can be attached to chassis in multiple locations to
allow for proper radio mounting.
13. Install radio panel using original screws.
1005719
A
B
C
Figure 3.92: Radio and Support
14. Adjust bracket (A) (if necessary) by loosening nuts (B) to
allow radio to slide into opening and securely capture
support (C).
1005776
A
Figure 3.93: Antenna Mount on Cab Roof
15. Retrieve antenna from inside cab and remove protective
cover from base.
16. Remove protective cover (A) from antenna mount on cab
roof and thread antenna onto base until hand tight.
NOTE:
Store protective cover in cab and reinstall to protect
antenna mount if antenna needs to be removed.
