215015
147
Revision A
1009392
CXXX
MXXX
REEL DRV SPD XXXX
D 0 P 0
- +
D
D
B
A
C
E
Figure 4.134: Reel Drive
CAUTION
Check to be sure all bystanders have cleared the area.
7.
Press SELECT (E) until REEL DRV SPD XXXX is displayed on
the upper line.
IMPORTANT:
Do
NOT
overspeed the reel.
8.
Press and hold HAZARD (C) button.
•
Press left arrow (B) to decrease reel speed.
•
Press right arrow (D) to increase reel speed.
IMPORTANT:
Verify the reel drive is functioning properly.
9.
Release HAZARD (C) button. The reel will stop.
10. Press PROGRAM (A) to exit programming mode or press
SELECT (E) to proceed to next ACTIVATE FUNCTION.
4.9.7
Testing the Rotary Disc Drive Circuit Activate Function Using the Cab
Display Module
IMPORTANT:
Do
NOT
overspeed a drive. Overspeeding can lead to vibration, belt failures, or other overspeeding related problems.
NOTE:
•
A rotary disc header
MUST
be attached to windrower to follow this procedure.
•
The engine
MUST
be running to perform this procedure.
1009099
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 4.135: CDM Programming Buttons
1.
Start the engine.
2.
Press PROGRAM (A) and SELECT (B) on cab display module
(CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.
