![background image](http://html1.mh-extra.com/html/macdon/m155/m155_unloading-and-assembly-instructions_3211045170.webp)
215015
144
Revision A
4.9.5
Testing the Draper Drive Circuit Activate Function Using the Cab
Display Module
IMPORTANT:
Do
NOT
overspeed a drive. Overspeeding can lead to vibration, belt failures, or other overspeeding related problems.
NOTE:
•
A draper header
MUST
be attached to windrower to follow this procedure.
•
The engine
MUST
be running to perform this procedure.
1009099
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 4.127: CDM Programming Buttons
1.
Start the engine.
2.
Press PROGRAM (A) and SELECT (B) on cab display module
(CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.
1009288
CXXX
MXXX
DIAGNOSTIC MODE?
NO/YES
A
B
Figure 4.128: Diagnostic Functions
3.
Press SELECT (B) until DIAGNOSTIC MODE? is displayed in
upper line.
•
NO/YES is displayed on the lower line.
4.
Press right arrow (A) to select YES. Press SELECT (B).