215015
145
Revision A
1009330
CXXX
MXXX
ACTIVATE FUNCTIONS?
NO/YES
B
A
Figure 4.129: Functions
5.
Press SELECT (B) until ACTIVATE FUNCTIONS? is displayed
on the upper line.
•
NO/YES is displayed on the lower line.
6.
Press right arrow (A) to select YES. Press SELECT (B).
•
ACTIVATE HEADER HT is displayed on the upper line.
1009332
CXXX
MXXX
DRAPER DRV SPD XXXX
D 0 P 0
- +
D
D
B
A
C
E
Figure 4.130: Draper Drive
CAUTION
Check to be sure all bystanders have cleared the area.
7.
Press SELECT (E) until DRAPER DRV SPD XXXX is displayed
on the upper line.
IMPORTANT:
Do
NOT
overspeed the drapers.
8.
Press and hold HAZARD (C) button.
•
Press left arrow (B) to decrease draper speed.
•
Press right arrow (D) to increase draper speed.
IMPORTANT:
Verify the draper drive is functioning properly.
9.
Release the HAZARD (C) button. The drapers will stop.
10. Press PROGRAM (A) to exit programming mode or press
SELECT (E) to proceed to next ACTIVATE FUNCTION.
4.9.6
Testing the Reel Drive Circuit Activate Function Using the Cab Display Module
IMPORTANT:
Do
NOT
overspeed a drive. Overspeeding can lead to vibration, belt failures, or other overspeeding related problems.
NOTE:
•
The header
MUST
be attached to the windrower to follow this procedure.
•
This procedure does not apply to rotary disc headers.
•
The engine
MUST
be running to perform this procedure.
