215015
80
Revision A
3.18.10
Starting Engine
CAUTION
Park on a flat, level surface with the ground speed lever in N-DETENT position and the steering wheel in locked position
(centered). Wait for the CDM to beep and display an
“
In Park
”
message to confirm the park brakes have engaged.
1.
Ensure there is sufficient fuel for a 15 minute run.
1009548
A
Figure 3.108: Operator Console
2.
Ensure lock (A) is engaged at the cab-forward or engine-
forward position.
1009549
A
B
Figure 3.109: Operator Console
3.
Move ground speed lever (GSL) (A) into the N-DETENT
position.
4.
Turn the steering wheel until it locks (center).
5.
Push header drive switch (B) to the OFF position.
CAUTION
Check to be sure all bystanders have cleared the area.
1006040
A
B
Figure 3.110: Operator Console
Normal start (all engines):
6.
Follow these steps when starting engine in temperatures
above 16°C (60°F):
a.
Move throttle fully back to START position (A).
b.
Sound horn three times.
NOTE:
Horn is located on the headliner.
c.
Turn ignition key (B) to RUN position.
NOTE:
A single loud tone will sound, engine warning lights will
illuminate, and the cab display module will display
HEADER DISENGAGED and IN PARK.