215015
77
Revision A
3.18.4
Checking Hydraulic Oil Level
1000435
A
Figure 3.99: Engine Hood
1.
Clean filler cap (A) and surrounding area.
2.
Turn filler cap (A) counterclockwise to unlock cap and
remove dipstick.
1000074
Figure 3.100: Hydraulic Oil Levels
3.
Ensure hydraulic oil level is between the low (L) and
high (H) marks.
4.
If necessary, add oil to maintain a level between the low (L)
and high (H) marks. Refer to
for
specifications.
5.
Reinstall dipstick and filler cap, and turn clockwise to
tighten and lock.
3.18.5
Checking Fuel Separator
1008750
A
Figure 3.101: Fuel Filter
1.
Place a container under filter drain valve (A).
2.
Turn drain valve (A) by hand 1 1/2 to 2 turns
counterclockwise until fuel begins draining.
3.
Drain the filter sump of water and sediment until clear fuel
is visible. Clean as necessary.
4.
Turn drain valve (A) by hand 1 1/2 to 2 turns clockwise
until tight.
5.
Dispose of fluid in a safe manner.
