215015
132
Revision A
4.8
Troubleshooting Windrower Problems
4.8.1
Displaying the Windrower and Engine Error Codes
1009099
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 4.97: CDM Programming Buttons
1.
Turn ignition key to RUN, or start the engine.
2.
Press PROGRAM (A) and SELECT (B) on cab display module
(CDM) to enter programming mode. Press SELECT (B).
•
WINDROWER SETUP? is displayed on the upper line.
3.
Press SELECT (B) until DIAGNOSTIC MODE? is displayed in
upper line.
•
NO/YES is displayed on the lower line.
1009288
CXXX
MXXX
DIAGNOSTIC MODE?
NO/YES
A
B
Figure 4.98: Diagnostic Functions
4.
Press right arrow (A) to select YES. Press SELECT (B).
5.
VIEW ERROR CODES? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
6.
Press right arrow (A) to select YES. Press SELECT (B).
•
VIEW WINDRWR CODES? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
1009344
CXXX
MXXX
VIEW WINDRWR CODES?
NO/YES
C
A
B
C
Figure 4.99: Windrower Codes
7.
Press right arrow (A) to select YES. Press SELECT (C).
•
The most recent error code will be displayed.
8.
Press right (A) or left (B) arrow to cycle through the last ten
recorded windrower error codes until EXIT WINDROWER
CODES is displayed.
9.
Press right arrow (A) to select YES. Press SELECT (C).
•
VIEW ENGINE CODES is displayed on the upper line.
•
NO/YES is displayed on the lower line.
