LSIS XDL-L7NH Series, User Manual, Page: 278 / 348

10. Product Specifications
10-18
 Electric Brake Specifications
Applicable Motor Series
SEP/FEP SFP/FFP SGP/FGP
Purpose Maintenance Maintenance Maintenance
Input voltage (V)
DC 24V DC 24V DC 90V
Static friction torque (N•m)
10.4 40 74
Capacity (W)
19.4 25 32
Coil resistance ( Ω )
29.6 23 327
Rated current (A)
0.81 1.04 0.28
Braking mechanism Spring brake Spring brake Spring brake
Insulation class Grade F Grade F Grade F
Note 1) DO NOT apply DC24V power (for interface only) to electronic brake.
You MUST use power source only for electronic brake.
Note 2) Electronic brake installed in our servo motor applies same specifications for each series.
Note 3) Electric brakes are designed to maintain a stop. Never use them for absolute braking.
Note 4) The characteristics of the electric brakes were measured at 20°C.
Note 5) These brake specifications are subject to change. Check the voltage specifications on your specific
motor.
■ Heat Sink
Classification Standard (mm) Classification
AP13 350x350x20
AP18 550x550x30
AP22 650x650x35
Note 1) The data on the product features is measured when those heat sinks were applied.
※ Exculding axis penetration in the IP grade
※ When you attach reducer to the motor, we don’t guarantee IP for reducer.
※ If you bend over specification designated in cable standard, it is difficult to guarantee IP marked
※ It can be satisfied Prtotection grade when you use private cable only.