Leibinger JET3 up, Operating Manual

Page: 64 / 412

Page 62 Transport/Start up Group 5
Release R1.06 JET3up
5.5.3.2 Mechanical installation
ATTENTION
For the mechanical installation of the shaft encoder you have to pay
attention in any case that the encoder is protected against axial and
radial strain during the mounting and the continuous operation. For
this a rubber gaiter or a plastic coupling is used.
If the conditions allow it, the shaft encoder can be also adapted to a production line
with a friction wheel.
ATTENTION
Risk of injury!
The shaft encoder has to be installed or mounted that no risks of
injury can occur!
5.5.4 Interface X4 - Digital inputs
19 inputs for special functions are available whereof the connections of 6 inputs can
be freely selected.
Plug assignment: Pin connection:
Pin Designation Pin Designation
1 +Reset Counter 14 +24V (1)
2 +Increment Counter 15 GND Reset Counter /
Increment Counter
3 +Jobselect 0 16 +Jobselect 1
4 +Jobselect 2 17 +Jobselect 3
5 +Jobselect 4 18 +Jobselect 5
6 +Jobselect 6 19 +Jobselect 7
7 +Jobselect 8 20 +Jobselect 9
8 GND Jobselect 0-9 21 GND Input 0-5
9 +Input 0 22 +Input 1
10 +Input 2 23 +Input 3
11 +Input 4 24 +Input 5
12 +Power ON 25 GND Power On
13 GND 24V