Leibinger JET3 up, Operating Manual, Page: 322 / 412

Page 320 Job Editor Group 8
Release R1.06 JET3up
8.7.3.1 Counter parameter
On the <Counter> tab the basic counter settings are defined.
Figure 168 Print elements: counter settings
1 – <Counter> tab 10 – Tab bar <Object settings>
2 – Display field <Counter digits> 11 – Display field <Start value>
3 – Check box <Left hand zeros> 12 – Display field <Initial value>
4 – Display field <Step width> 13 – Display field <End value>
5 – Display field <Repetition> 14 – Selection <Counter (Loop/Stop)>
6 – Drop-down list <Count increment> 15 – Drop-down list <Counter reset>
7 – Selection <Counter direction> 16 –<OK> Button
8 – Check box <Don’t print> 17 – <Cancel> Button
9 – Check box <Global counter>
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17