Leibinger JET3 up, Operating Manual

Page: 251 / 412

Group 8 Job Editor Page 249
JET3up Release R1.06
ATTENTION
For technical reasons the <Contrast > function works only for
complete strokes (vertical printed dot line). This means that objects
positioned above or below the object with the contrast Attribute will
also be affected from the setting.
Example:
In a two line printout the contrast
attribut was assigned to the
object in the lower line only.
Nevertheless the objects in the
upper line which are positioned
directly above the object with the
contrast attribut will be also
affected from this setting.
1. Line:
Leib
inger In k-Jet
2. Line:
Printer
Note:
The higher the contrast set the lower is the max. printing speed!
8.4.2 Bold level - Bold text
In order to set the <bold> attribute to a text the bold level has to be determined.
There are 8 levels available: 0 – 7. The currently value set is shown in the
respective input field.
The
<bold> attribute is created by printing additional parallel strokes to the
standard dots.
Example 0 = no bold text (single strokes)
1 = 2 dots are placed parallel (2 strokes)
2 = 3 dots are placed parallel (3 strokes)
…..
7 = 8 dots are placed parallel (8 strokes)
The value set is shown on the accordant input field.
Figure 128 Object settings (Bold text)
Printout:
Standard With bold attribut