Leibinger JET3 up, Operating Manual

Page: 334 / 412

Page 332 Job Editor Group 8
Release R1.06 JET3up
Interface settings
With the JET3up interface setting <Extern Text for serial interface> and <Extern
Text for Ethernet interface> the JET3up printer does not expect any control
characters. Each character sent will be interpreted as data. This will also be true for
control characters like
<line feed> , <form feed> or <carriage return>.
There is an exception for the
<Extern Text variable length> function. With this
function you can set control characters that mask the transferred string by defining
a
<Start symbol > and a <End symbol> .
Requirements <Mailing>

For the <Mailing> function you will have to set the parameters for the
external data source.

To use the <Mailing> function you will have to create an <Extern Text>
object. The parameters for the object are set in the <Extern Text> dialog
box. You can define which field of a data set should be assigned to the
object and you can set wildcards for this field.
INFORMATION
The JET3up printer also offers the possibility of controlling print job
selection and printout using s special script language. Data and
commands can be sent by modem, Ethernet or RS 232 interface
using a terminal software.
Shoot & Print
Data and commands can also be coded as bar codes and transferred
with a bar code scanner connected to serial interface to the JET3up
printer.
For this option a bar code scanner with serial interface is required!
A bar code scanner with a USB interface (HID device) cannot be used
in combination with the script language.
Interface for Shoot & Print using
a bar code scanner with serial
interface
Available serial interfaces for
using theJET3 script language
Regarding the JET3up script language and the possibilities of Shoot &
Print detailed documentation is available separately.