Leibinger JET3 up, Operating Manual

Page: 250 / 412

Page 248 Job Editor Group 8
Release R1.06 JET3up
Available settings
Pos. Object settings Note
3 Printout contrast Not available for barcodes and graphics
4 ICG - I nter C haracter G ap Not available for barcodes and graphics
5 Bold printout Not available for barcodes and graphics
6 Printout inverted See separate description
7 Alternating printout See separate description
8 Proportional printout Not available for barcodes and graphics
9 Orientation and mirroring See separate description
11 Prompt field function Not available for graphics
12 Print when counter=0 Object is assigned to a counter
13 Assigned Counter ID Counter ID the object is assigned to
8.4.1 Contrast value
The setting determines the print contrast of the object. Allowed are values between
0 – 7. The currently value set is shown in the respective input field.
In order to increase the contrast of a printout, dots were printed on top of each
other.
Example
0 = no contrast increasing (single printout)
1 = 2 dots are placed on top of each other
2 = 3 dots are placed on top of each other
…..
7 = 8 dots are placed on top of each other
The value set is displayed in the respective input field.
Figure 127 Object settings – Contrast
Printout:
Standard With contrast