Page 392
Appendix - Encoder Guidelines
Group 12
Release R1.06
JET3up
Connection of external devices on the printer:
To protect the encoder and of course in a particular way the controller board of the
printer, it is not allowed to plug and un-plug the connectors as long as the printer is
switched on and connected to the main power supply.
ATTENTION
This rule is also valid for all other external connected signals or devices
like e.g. PrintGo-sensor, input-signals, output-signals, Ethernet interface
and so on.
Therefore we want to point out, that the plugging of any connectors while the printer is
connected to the mains, can cause serious damages of the external devices and also of
the printer controller itself.
Therefore we strictly recommend to shut-down the printer and disconnect it from the
mains, before plug and unplug any connectors.
Summary of Contents for JET3 up
