Page 230
Job Editor
Group 8
Release R1.06
JET3up
Proceeding:
Configure the
<Network ID>
of the printer in the
<Basic settings> (1)
and/or
Plug an USB-Stick into the USB-socket of the device
(2)
.
Press the button
<Export>
(3)
.
If there is a
<Network ID>
configured and the network connection is
established a confirmation prompt will pop up asking whether the data shall be
saved to the network storage device
(4)
. If this message is confirmed the
information will be stored on the network storage device. If the message is not
confirmed (
<No>
button) it is checked whether an USB stick is availabe. If no
USB stick is avaibe a respective message box pops up
(5)
. With an USB stick
inserted the information is stored to the USB stick.
When the data is saved on the connected medium a confirmation
message pops
up
(6).
The message have to be confirmed with the
<OK>
button
(7)
.
The files are saved in a folder named
JET3UP_Log
. If this folder does not
already exist it will be created by the
<Export>
function.
Summary of Contents for JET3 up
