Page 126
Job Editor
Group 8
Release R1.06
JET3up
Proceeding:
Press on the tab
<Language/Unit>
(2)
to select the tab.
Press on the arrow key of the accordant drop-down list. The drop-down list
opens for selection.
Now select the requested language or the requested keyboard font.
3. Measuring unit:
The two different measuring units „mm“ and „inch“ are available.
Figure 43
Set measuring unit
1 – Dialog box <Basic Settings>
3 – Drop-down list <Measuring unit>
2 – Tab <Language/Unit>
Proceeding:
Press on the tab
<Language/Unit>
(2)
to select the tab.
Press on the arrow key of the drop-down list <Measuring unit>
(3)
. The
drop-down list opens for selection.
Now select the requested measuring unit.
2
1
3
Summary of Contents for JET3 up
