Leibinger JET3 up, Operating Manual

Page: 160 / 412

Page 158 Job Editor Group 8
Release R1.06 JET3up
7.3.5 Password settings and user permissions
The LEIBINGER JET3up offers a user based password protection in order to prevent
from faulty operation or non-authorized access. It is possible to set different kind of
access privileges for 5 users.
7.3.5.1 Dialog box password settings
A click on the option <Password Settings> (2) opens the dialog box < Password
settings> (3)
.
The following settings are available:

Selection of users

Definition of access rights.

Definition of passwords
In the several tabs you can enable or lock the functions (8) for the currently
selected user. Functions are enabled / disabled by checking / unchecking the
checkboxes.
In order to switch between tabs click on the caption of the tab
(7)
.
Note:
The proceeding corresponds to Windows™-standard procedures.
The drop-down list
<User> (5) provides 5 user. All settings entered are always
valid for the currently selected user.
The password for the currently selected user is set in the input field
<Password>
(5) . The input field <Password> shows also a password already set in plain text.
In order to change an existing password it can just be overwritten.
With the button
<set…> (6) the password entered for the current user level will
be taken over.
With the button
<OK> (9) the settings will be saved and the menu closes.
The button
<Cancel> (10)
discards all changes and closes the dialog box.