Leibinger JET3 up, Operating Manual

Page: 351 / 412

Group 8 Job Editor Page 349
JET3up Release R1.06
Object 2:
Wildcards: YYYYY 5 wildcards
Offset: 1
1 offset
Sum of wildcards and offset: 6
Start symbol: G
End symbol: S
Object 3:
Wildcards: ZZZ 3 wildcards
Offset:
6
6 offset
Sum of wildcards and offset:
9
Start symbol: G
End symbol: S
The input buffer in this example has the size of 9 characters because the largest
sum of wildcards and offset is 9.
Beside the input buffer there is also a display buffer. The content of the display
buffer is what you see in the print preview of the main window of the JET3up
printer.
There are the following rules regarding the input and the display buffer:
1. The filling of the input buffer starts with each <
Start symbol>
received.
2. The filling of the input buffer stops with the first respective
<End symbol>
received.
3. If the number of the characters received between < Start symbol> and
<End symbol> exceeds the size of the input buffer all excess characters will
be discarded.
4. If the number of the received characters between < Start symbol> and
<End symbol> is smaller than the size of the input buffer the input buffer
will only be filled with the received characters.
5. With a valid <End symbol> received the current content of the input buffer
is transferred to the display buffer.
6. The print-out always reflects the content of the display buffer (what you see
is what you get printed).
7. The input buffer is emptied as soon as its content is transferred to the
display buffer. The filling starts again with the next <
Start symbol>
received.