Page 290
Job Editor
Group 8
Release R1.06
JET3up
8.5.4
Date change offset
With this function you can shift the date change to an earlier or later point in time.
Note:
The shifting happens in hours- and minutes. The max. possible offset is +/-
23 hours and 59 minutes.
Figure 159 Date change offset tab
1 – <Date change parameter> tab
8 – Negative <Offset>
2 – <+/-> drop-down list
9 – Offset <Hour block>
3 – Arrow keys
10 – Offset <Minute block>
4 – Input field <Offset time>
11 – <Decrease>Offset
5 – <OK> Button
12 – <Increase>Offset
6 – <Cancel> Button
13 – Adjusted <Date change offset>
7 – Positive <Offset>
Proceeding:
Select the
<Date change Parameter>
tab
(1)
.
Select in the
<+/->
drop-down list
(2)
the kind of offset.
<+>
stands for a
positive offset
(7)
. The date change is shifted to a later point in time.
<->
stands for a negative offset
(8)
. The date change is shifted to an earlier point in
time.
Select the hour
(9)
or the minute block
(10)
in the input field
(4)
for the
<Date
change offset
>
(13)
.
The
<Date change offset>
is set with the two arrow keys
(3)
. The left arrow
key will decrease the
<Offset>
the right arrow key will increase the
<Offset>.
All settings are confirmed with the
<OK>
button
(5)
.
With the
<Cancel>
button
(6)
the tab is closed without saving.
1
2
7
3
4
8
9 10
11 12
13
6
5
Summary of Contents for JET3 up
