Leibinger JET3 up, Operating Manual

Page: 248 / 412

Page 246 Job Editor Group 8
Release R1.06 JET3up
8.3.3 Close job editor
Figure 125 Close job editor
1 – Button <Job> 4 – Button <Cancel>
2 – Option <Close Editor> 5 – Button <No>
3 –Confirmation prompt 6 – Button <Yes>
With the option <Close Editor> you can close the job editor.
If changes were not already saved a confirmation prompt pops up.
In this case the following options are available:

Press the button <Cancel> (4) to abort the process and to go back to the
editor.

Press the button
<No> (5)
to leave the editor without saving the job.

Press the button <Yes> (6) to save the job when leaving the editor. Attention!
The saving happens under the current data file name. The existing data will be
overwritten!
1
4
3
2
5
6