Group 5
Transport/Start up
Page 55
JET3up
Release R1.06
Turn on the printer. For this touch the dark
touch-display
(1)
at any position for
approx. 2 sec.
The device turns on and the main window with the
message<Initialization>
(2)
is displayed. Wait until the initialization is finished. After this process the
message<Emergency Shutdown>
(3)
is displayed.
Press the button
<OK>
(4)
.
Change to tab
<Special functions /Tools>
(5)
.
Now press the button
<Fill up Routine>
(6)
. The
message <Fill up Routine>
(7)
is faded-in.
Press the button
<Next>
(8)
to start the filling routine.
Note:
This process takes approx. 10 minutes.
After finishing the process an according message
(9)
is displayed. Press the
button
<OK>
(10)
to finish the routine.
Press the button
<Close>
(11)
to leave the menu
<Special functions /Tools>
.
The message
<Hydraulic control>
(12)
is faded-in.
Note:
For leaving the service menu the hydraulic control will be turned on again
automatically.
Press the button
<OK>
(13)
to close the service menu.
The main window
(14)
is now displayed. If required the device starts
automatically with the bleeding of the system.
During the process the message
<Bleeding>
(4)
is displayed. The bleeding
takes between 1 – 5 min. The process can be canceled by pressing the button
<Cancel>
(5)
.
Now the printer is ready to operate.
Summary of Contents for JET3 up
