Leibinger JET3 up, Operating Manual, Page: 133 / 412

Group 8 Job Editor Page 131
JET3up Release R1.06
Proceeding:

Press on the tab <Date/Time> (2) to select the tab.

Now mark in the setting field <Time> (3) the hour-, minute- or second
block to change the values.

With the two <Arrow keys> (5) you can increase or reduce the values of
the blocks wich are each marked.

To define the time zone press on the drop-down list
<Time zone> (6)
. The
Drop-down list opens for selection.

Now select the requested time zone.
4. Automatic clock change:
The function enables you to activate or deactivate the automatic change to
summer- and wintertime (daylight savings time [DST]).
Proceeding:
E.g.: The automatic change to summer- and wintertime should be activated.

Press on the tab <Date/Time> (2) to select the tab.

Now activate the automatic clock change by clicking on the check box (3) .
An automatic change is displayed by
√
in the check box.
Figure 47 Automatic clock change (Summer-/Wintertime)
2
3