Leibinger JET3 up, Operating Manual

Page: 69 / 412

Group 6 Operation – Design and structure Page 67
JET3up Release R1.06
6 Operation
6.1 Construction/Structure of the device
The high-performance LEIBINGER JET3up is manufactured of a solid two parts
stainless steel cabinet. Due to the two parts construction you will get a thermal
separation between the hydraulic- and electronic section. The device consists of the
following main components.
Figure 14 Equipment configuration (General view)
1 – Electronic cabinet 4 – Refilling unit
2 – TFT – Touch Display 5 – Print head with umbilical
3 – Hydraulic cabinet
In the closed electronic cabinet you will find the essential electronic components as
power supply, the TFT-Touch Display as well as the controller board.
The large central arranged
TFT-Touch Display describes the interactive interface for
the operator. This central entry medium with its extensive 10,4” color display with
backlight allows a clear, self-explaining operator guidance without additional keys
and switches.
In the
hydraulic cabinet
you find all components which are required for the
transportation and preparation of ink.
The
refilling unit provides a supply of consumables. It contains two separate
reservoir tanks for ink and solvent. The unpressurized tanks can be refilled without
interrupt procedure, odorless and splash-free during the operation.
The
print head contains all mechanical, electronical and hydraulic components which
are required for the creation of printout. It is connected with the hydraulic cabinet by
a flexible umbilical.
4
5
1
3
2