Leibinger JET3 up, Operating Manual

Page: 106 / 412

Page 104 Job Editor Group 8
Release R1.06 JET3up
Printstyle (15)
<Print height> (16)
The setting defines the distances between the
drops and therefore the print height.
<Orientation> (17) All printing objects can be rotated by 180°.
<mirrored> (18) All printing objects will be mirrored.
Print Parameter (21)
<PrintGo Distance> (22) Distance between two print-outs. This option is
only available for the job list type
<Job
organisator> . It refers to print-outs created by the
<PrintGo Repeat>
option. Please see example.
<PrintGo Repeat> (23) Number of repetitions with each PrintGo signal.
This option is only available for the job list type
<Job organisator>.
Please see example.
PrintGo Parameter (20)
<endless> (24) The print-out will be carried out until a
<PrintStop> command occurs. This option is only
available for the job list type <Job organisator>.
Please see example at the end of this chapter.
<PrintGo Source>(25) Defines the source and the edge to be evaluated of
the PrintGo signal
<PrintGo Gate> (26) With this option selected an additional print start
query will be activated using a separate PrintGo
Gate sensor. The print-out will only start as long as
the monitored sensor is active. Additionally it can
be defined which kind of signal level shall be
recognized as “active”.