Leibinger JET3 up, Operating Manual

Page: 371 / 412

Group 10 Setting-up/Maintenance Page 369
JET3up Release R1.06
10.1.2 TAG-reader
The TAG-reader of the Leibinger JET3up printer guarantees a faultless function with
regard to the correct usage of ink and solvent.
The TAG-reader makes sure that only ink and solvent is used that is approved by
LEIBINGER.
With each refill the TAG of the ink or solvent bottle is checked for a valid TAG. If no
valid TAG is activated during the refill the printer will shut down to stand-by mode.
Each TAG can be activated only once.
Information
A TAG is electronically readable label which holds coded information. The
information is readable with TAG reader. The coded information is read
out wireless by radio.
Figure 186
1 – Reservoir tank „Ink“ 4 – Refilling bottle
2 – Reservoir tank „Solvent“ 5 – TAG area on the refill bottle
3 – TAG reader
10.1.2.1 Execution of the TAG-activation and refilling
Attention
The reservoir tanks mustn’t be refilled without respective messages from
the printer.
A too early refilling bears the risk of overfilling and spillage of ink or
solvent!
1
2
3
4
5