Group 8
Job Editor
Page 191
JET3up
Release R1.06
ATTENTION
Please check whether there are counter objects (job counters)
defined for the currently loaded job. If there are counter objects
(job counters) whose method for the
<Counter reset>
is set to
„
production counter
“, they will be also reset. The reset method
“production counter” for
<Counter reset>
is only available for the
1. product counter.
You will find further information regarding the counter reset
methods in the chapter
8.7.3.1.10 Counter reset (methods)
2. Change counter values (Figure 87)
Change the value of the counter with the
arrow keys (7)
. The value of the
counter is increased or reduced in single steps by pressing the accordant
buttons.
Or
Click in the
Counter input field (4)
. The
Numeric keypad (8)
opens for input.
If there are 2 product counters defined each of them has to be set separately.
The product counter dialog box has to be re-opened for that procedure.
INFORMATION
You will find further information regarding the working with
Numeric keypads in the
chapter
Confirm the value change by pressing the button
<Set>
(5)
or cancel the
process with the button
<Cancel>
(6)
.
The set value is now displayed in the status field
<Production Counter>
of
the main window.
This procedure has to be carried out for each product counter separately. The
dialog box has to be re-opened to set the second product counter.
Summary of Contents for JET3 up
