Lanier AP4510, Setup Manual

Page: 138 / 424

Troubleshooting
64
5
Remove Misfeed
Z:Duplex Unit
There is paper in the Duplex
Unit. Remove the misfed paper.
See p.80 “Removing Misfed
Paper”.
Remove Paper
All Output Trays All output trays are full, and
the print job is suspended. Remove paper from the trays,
and the print job will be re-
sumed automatically.
Remove Paper
Duplex Unit
There is paper in the Duplex
Unit. Remove paper from the Du-
plex Unit.
Remove Paper
Fin. Proof Tray
The Finisher proof tray is full,
and the print job is suspend-
ed. Remove paper from the tray,
and the print job will be re-
sumed automatically.
Remove Paper
Fin. Shift Tray
The Finisher shift tray is full,
and the print job is suspend-
ed. Remove paper from the tray,
and the print job will be re-
sumed automatically.
Remove Paper
Inside Finisher
There is paper in the Finisher. Remove paper from the Fin-
isher.
Remove Paper
Mailb.ProofTray The Mailbox proof tray is full,
and the print job is suspend-
ed. Remove paper from the tray,
and the print job will be re-
sumed automatically.
Remove Paper
Mailbox Tray #
The Mailbox is full, and the
print job is suspended.
#: tray number
Remove paper from the Mail-
box, and the print job will be
resumed automatically.
Remove Paper
Standard Tray The standard tray is full, and
the print job is suspended. Remove paper from the stand-
ard tray, and the print job will
be resumed automatically.
Replace
Maintenance Kit
It is time to replace parts in-
cluded in the Maintenance
Kit. Replace parts.
Replace
Toner Bottle The toner bottle is not set cor-
rectly or toner is almost run
out. Set the toner bottle correctly.
See p.80 “Removing Misfed
Paper”.
Toner Dust is Full
The toner dust is full. Call your salse or service
representative.
Replace
Transfer Unit
It is time to replace the trans-
fer unit. Replace the transfer unit.
Reset Bypass
Correctly
The Bypass Tray is not set cor-
rectly or is not set. Set the Bypass Tray correctly.
Reset Duplex
Unit Correctly
The Duplex Unit is not set cor-
rectly. Set the Duplex Unit correctly.
If the message appears again,
call your sales or service rep-
resentative.
An error has occurred in the
Duplex Unit.
Reset Fusing
Unit Correctly
The fusing unit is not set cor-
rectly. Set the fusing unit correctly,
or set the proper fusing unit.
Messages/Second messages Description Solution