Lanier AP4510, Setup Manual

Page: 129 / 424

55
5. Troubleshooting
Error & Status Messages on the Control
Panel
❖ ❖ ❖ ❖
Status Messages
Messages/Second messages Status
Energy Save Mode The printer is in Energy Saver (low-power) mode. No action is
required.
Hex Dump Mode The printer receives data in hexadecimal numbers in Hex
Dump mode. Turn off the printer after printing, and then turn
back on.
Loading Toner... The printer is loading toner. Wait until "Ready" appears on the
panel display.
Offline The printer is offline. Set the printer online by pressing
{{{{
On
Line
}}}}
to start printing.
Printing... The printer is making prints. Wait for a while.
Processing... The printer is processing the print job. Wait for a while.
Ready The default ready message. The printer is ready for use. No ac-
tion is required.
Resetting Job... The printer is resetting the print job. Wait until "Ready" ap-
pears on the panel display.
Waiting... The printer is waiting for the next data to print. Wait for a
while.
Warming Up... The printer is warming up and not ready. Wait until "Ready"
appears on the panel display.