Lanier AP4510, Setup Manual

Page: 282 / 424

NetWare Configuration
42
4
EEEE
Click to select the IPX address of the Network Interface Board you are con-
figuring, and then click
[ Next > ] .
Note
❒
If you do not know which Network Interface Board you are configuring,
print a network configuration page to check the MAC address (Network
address).
FFFF
Make sure that the MAC address and IPX address are correct, and then click
[ Finish ] .
GGGG
Type the print server name into the [ Device Name ] box, and then click [ Next > ] .
The default setting is “RDP_” followed by the 6 digit serial number. We rec-
ommend that you change it to something that is easier to remember or some-
thing based on the structure of the network.
HHHH
In a dialog box for selecting a network environment, click to select the
[ Net-
Ware ] check box and click to clear the [ TCP/IP ] check box.
IIII
Click
[ Next > ]
.
A dialog box for configuring the NetWare environment appears.
JJJJ
Select [ Bindery ] when printing under Bindery mode, or select [ NDS ] when
printing under NDS mode.
When you are using NetWare version 4.x, you should select [ NDS ] .
KKKK
If you selected
[ Bindery ]
, type into the
[ File Server Name: ]
box the name of the
file server in which a print server is to be created.
After clicking
[ Browse ]
, you can select a file server among those listed in the
[ Browse ] dialog box.
LLLL
If you selected [ NDS ] , type into the [ Tree: ] box the name of the NDS tree in
which the print server is created, and then type the context into the [ Con-
text: ] box.
Clicking
[ Browse ]
, you can select an NDS tree and an NDS context among
those listed in the [ Browse ] dialog boxes.
As a context, object names are typed from a lower object and divided by a pe-
riod. For example, if you want to create a print server into NET under DS,
type “NET.DS”.
MMMM
Click [ Next > ] .