Lanier AP4510, Setup Manual

Page: 258 / 424

Windows 2000 Configuration
18
2
Installing SmartNetMonitor for Client
For more information about installing SmartNetMonitor for Client, see the Setup
Guide.
After the installation is complete, configure the printer port with SmartNetMon-
itor for Client.
⇒
p.19 “Setting Up the Printer Driver”
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, then delete it. For more information about SmartNetMonitor for Cli-
ent, see SmartNetMonitor for Client Help.
AAAA
From the [ Printers ] window, click the icon of the printer which uses Smart-
NetMonitor for Client to print. On the [ File ] menu, click [ Properties ] .
BBBB
Click the
[ Ports ]
tab, and then make sure that the SmartNetMonitor for Cli-
ent port is shown in the [ Print to the following port(s) ] box.
Remember the port name because this port should be deleted later.
CCCC
Select the [ FILE ] check box in the [ Port ] column.
DDDD
Click [ OK ] to close the Printer Properties.
The port which is currently in use is changed.
EEEE
Open the Printer Properties of the same printer.
FFFF
Select the [ Ports ] tab.
GGGG
At the [ Port ] column in the [ Print to the following port(s) ] dialog box, click to se-
lect the SmartNetMonitor for Client port name as in step
BBBB
.
HHHH
Click [ Delete Port ] .
IIII
When the confirmation message appears, click [ Yes ] .
The port is deleted.
JJJJ
Click [ Close ] to close the Printer Properties.