Lanier AP4510, Setup Manual

Page: 271 / 424

Using SmartNetMonitor for Client
31
3
Installing SmartNetMonitor for Client
For more information about installing SmartNetMonitor for Client, see the Setup
Guide.
After the installation is complete, configure the printer port with SmartNetMon-
itor for Client.
⇒
p.32 “Setting Up the Printer Driver”
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, then delete it. For more information about SmartNetMonitor for Cli-
ent, see SmartNetMonitor for Client Help.
AAAA
From the [ Printers ] window, click the icon of the printer which uses Smart-
NetMonitor for Client to print. On the [ File ] menu, click [ Properties ] .
BBBB
Click the
[ Ports ]
tab, and then make sure that the SmartNetMonitor for Cli-
ent port is shown in the [ Print to the following port ] box.
Remember the port name because this port should be deleted later.
CCCC
From the [ Print to the following port ] box, select [ FILE ] .
DDDD
Click [ Apply ] .
The port which is currently in use is changed.
EEEE
Click [ Delete Port ] .
FFFF
After the confirmation message appears, click [ Yes ] .
The port is deleted.
GGGG
Click [ OK ] to close the printer properties.
Uninstalling SmartNetMonitor for Client
Preparation
Before uninstalling SmartNetMonitor for Client, make sure that:
• The port settings dialog box is closed.
• No printer is using the SmartNetMonitor for Client port as a printer port.
• You have performed login with the same user authority as that used to in-
stall SmartNetMonitor for Client.
AAAA
Open [ Control Panel ] , and then double-click the [ Add/Remove Programs ] icon.
BBBB
On the [ Install/Uninstall ] tab, click [ SmartNetMonitor for Client ] and click [ Add/Re-
move ] .