Lanier AP4510, Setup Manual

Page: 5 / 424

iii
R
CAUTION:
• Do not eat or swallow toner.
• Keep toner (used or unused) and toner bottle out of the reach of children.
• Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.
• Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• Do not allow paper clips, staples, or other small metallic objects to fall inside
the equipment.
• For environmental reasons, do not dispose of the equipment or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer or at appropriate collection sites.
• The inside of the machine could be very hot. Do not touch the parts with a
label indicating "
v
" (means hot surface). Touching "
v
" (means hot surface)
could result in a burn.
• Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies avail-
able at an authorized dealer.
• Do not put an object on the front cover when it is open.
• When removing misfed paper, do not touch the fusing section because it be-
comes very hot.
• To prevent an injury, this printer should be lifted by at least two people.
• When moving the machine, each person should hold the handles that are
located on opposite sides, and then lift it slowly. Lifting it carelessly or drop-
ping it may cause an injury.
• Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
AP3ENSetup-F-ricoh_FM.book Page iii Friday, October 5, 2001 2:43 PM