Lanier AP4510, Setup Manual

Page: 313 / 424

Remote Maintenance by telnet
73
6
IPP
Use the ipp command to configure the IPP settings.
❖ ❖ ❖ ❖
Viewing setting
The following command displays the current IPP settings.
msh> ipp
Example output:
timeout=900(sec)
auth basic
• The “timeout” setting specifies how many seconds the computer keeps try-
ing to access the network printer to send print jobs when no connection can
be made.
• The “auth” setting indicates the user authorization mode.
❖
❖ ❖
❖
IPP timeout configuration
Specify how many seconds to wait before canceling a print job if it has been
interrupted for some reason. The range of time can be changed between 30 to
65535 seconds.
msh> ipp timeout {30 - 65535}
❖ ❖ ❖ ❖
IPP user authorization configuration
Use the IPP user authorization to restrict users that can print with IPP. The de-
fault is “off” .
ipp auth {basic|digest|off}
• “basic” and “digest” are user authorization setting.
• “off” removes the user's authorization.
Note
❒
If you select “basic” or “digest”, see next section “Entry the IPP User Au-
thorization” for how to configure the user name. Up to ten user names are
available.
❖ ❖ ❖ ❖
Configuring the IPP user authorization
Use the following command:
ipp user
The following message appears.
Input user number (1 to 10):
Type the number, user name and password.
IPP user name:user1
IPP password:*******
After configuring the settings, the following message appears.
User configuration changed.