Lanier AP4510, Setup Manual

Page: 316 / 424

Appendix
76
6
Job Spool
Use this command to configure Job Spool settings.
Limitation
❒
You can only specify the LPR and IPP protocol.
Note
❒
This machine information cannot reload automatically when you confirm the
Job spool settings on the Web browser. Click
[ Reload ] or [ Refresh ] on the Web
browser when you want to reload this machine information.
❖ ❖ ❖ ❖
Reference
The job spool setting appears.
msh> spoolsw
❖ ❖ ❖ ❖
Job Spool Setting
msh> spoolsw spool {on | off}
Note
❒
Specify "on" to enable the job spool function or "off" to disable it.
❖
❖ ❖
❖
Clearing Spool Job
If the printer is turned off accidentally during a spool job, you can specify
whether the job will be reprinted when the printer is turned back on.
msh> spoolsw clearjob {on |off}
❖ ❖ ❖ ❖
Protocol Configuration
To change the protocol settings, use the following command. You can specify
the setting for
[ lpr ]
or
[ ipp ]
.
• lpr
msh> spoolsw lpr {on |off}
• ipp
msh> spoolsw ipp {on |off}
Changing the Host Name
Use the hostname command to change the printer name.
msh> hostname [ interface_name ] printer_name
*1
If you did not enter the interface name, it will be automatically set to the Ethernet in-
terface.
*2
If you install the 1394 Interface Option Type 4510, you can set the command.
interface name Interface to be configured
ether Ethernet interface
*1
ip1394
*2
IEEE 1394 interface