Lanier AP4510, Setup Manual

Page: 328 / 424

Appendix
88
6
Open log file <file name> (In print server mode) The specified log file
has been opened.
papd start. (AppleTalk) AppleTalk print service has started.
permission denied. Job cancellation was determined to be unau-
thorized after checking the user name and host
address (except for ROOT authorization).
phy release file open failed. Replacing the Network Interface Board is re-
quired. Contact your sales or service repre-
sentatives.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name> (In print server mode) The print queue name
cannot be serviced. Make sure that print queue
volume exists on the specified file server.
Print server <print server name> has no print-
er. (In print server mode) The printer object is not
assigned to the print server <print server
name>. Using NWAdmin, assign the printer
object, and then restart the printer device.
Print session full Cannot accept the print session.
Printer <printer name> has no queue (In print server mode) The print queue is not
assigned to the printer. Using NWAdmin, as-
sign the print queue to the printer, and then re-
start it.
pserver start. (NetWare) (In print server mode) NetWare service has
started.
Required computer name (<Computer
name>) is duplicated name The same computer name is detected on the
network. The start job determines the compu-
ter name by adding the computer name to the
suffix (0,1....). Configure a new computer
name that is unique.
Required file server (<file server name>) not
found Cannot find the required file server.
restarted. LPD has started.
sap enable, saptype=<SAP type>, sap-
name=<SAP name> The SAP function has started. The SAP (SAP
type and SAP name) packet is issued to adver-
tise the service on the SAP table on the Net-
Ware server.
Set context to <NDS context name> A <NDS context name> has been set.
shutdown signal received. network service re-
booting... Rebooting the network service.
smbd start. (NetBEUI) An smbd (SMB (Server Message Block) serv-
ice) has started.
Snmp over ip is ready. Communication over TCP/IP with SNMP is
available.
Message Description and Solutions