Lanier AP4510, Setup Manual

Page: 403 / 424

Specifying the Device Option
27
1
Punch
Select the punch position for the output.
Limitation
❒
Before executing punch, make sure the number of collated set, the output tray
for punch and the number of punch holes are specified.
❒
When using this option, the optional Finisher unit is required.
❒
When printing with this option, be sure to specify the optional Finisher using
the value of “finisherproof” or “finishershift”, for example “outbin=finisher-
proof”. For more information about the optional Finisher unit, see
⇒
p.22
“Output Tray”
Note
❒
Available punch positions may vary depending the type of installed output
tray. For more information about punch, see the Printer Reference.
punch = value of punch position
*1
***LAND and ***PORT will result the same.
Punch Position Value
Left
leftport
*1
leftland
*1
Right
rightport
*1
rightland
*1
Top
topport
*1
topland
*1
Not Punch off