Lanier AP4510, Setup Manual

Page: 388 / 424

UNIX Configuration
12
1
rsh
% rsh host_name print < file_name
For example:
host name is nphost, file name is file1
% rsh nphost print < file1
Note
❒
“ host_name ” is the name entered when executing the installation shell script.
❒
If you use a HP-UX, use the remsh command instead of rsh.
rcp
❖
❖ ❖
❖
To specify and print the file
% rcp file_name [ file_name... ] host_name :
For example:
host name is nphost, file names are file1 and file2
% rcp file1 file2 nphost:
❖
❖ ❖
❖
To print all of the files in a directory
% rcp -r directory_name host_name :
For example:
host name is nphost, directory name is directory1
% rcp -r directory1 nphost:
Note
❒
“ host_name ” is the name entered when executing the installation shell script.
❒
You can use wild cards ( * or ? ) for the file name.
ftp
Depending on the number of files to be printed, use the put or mput commands.
Limitation
❒
File names cannot contain “=” or “,”.
❖
❖ ❖
❖
To print one file
ftp> put file_name
❖
❖ ❖
❖
To print several files
ftp> mput file_name [ file_name... ]
Note
❒
You can use wild cards ( * or ? ) for the file name with the mput command.
The following procedure shows an example of how to print a file using ftp.
It is not possible to set options with the mput command.