Lanier AP4510, Setup Manual

Page: 42 / 424

Configuring the Printer for the Network
32
3
DDDD
Press
{{{{U U U U}}}}
or
{{{{T T T T}}}}
to display “Net-
work Setup”.
EEEE
Press
{{{{
Enter #
}}}}
.
The following message appears on
the panel display.
FFFF
Select the protocol you want to
use.
Note
❒
Do not select protocols that are
not used on your network.
A
Press
{{{{U U U U}}}}
or
{{{{T T T T}}}}
to display
“Active Protocol”.
B
Press
{{{{
Enter #
}}}}
.
The current setting appears on
the panel display.
C
Set other protocols you need to
set in the same way.
Note
❒
Leave unused protocols "Not
Active".
GGGG
If you use TCP/IP, you should as-
sign the IP address to the printer.
Note
❒
To get the IP address for the
printer, contact your network
administrator.
A
Press
{{{{U U U U}}}}
or
{{{{T T T T}}}}
until the fol-
lowing message appears.
B
Press
{{{{
Enter #
}}}}
.
The current IP address appears
on the panel display.
C
Press
{{{{U U U U}}}}
or
{{{{T T T T}}}}
to enter the
left most entry field of the IP
address.
D
Press
{{{{
Enter #
}}}}
.
The pointer (
k
) moves to the
next entry field automatically.
Note
❒
You can return the pointer
(
k
) to the previous (left) entry
field by pressing
{{{{
Escape
}}}}
.
❒
If you press
{{{{
Escape
}}}}
when
the pointer (
k
) is on the left-
most position, the selected IP
address is reset.
E
Repeat steps
C C C C
and
D D D D
to enter
the IP address.
Check if the pointer (
k
) is at the
rightmost position, and press
{{{{
Enter #
}}}}
to register the IP ad-
dress you selected.
Host Interface:
Network Setup
Network Setup:
IP Address
Network Setup:
Active Protocol
Active Protocol:
TCP/IP
Network Setup:
IP Address
IP Address:
011.022.033.044
IP Address:
192.022.033.044
IP Address:
192.02
k
.033.044
IP Address:
192.168.000.011
Network Setup:
IP Address
AP3ENSetup-F-ricoh_FM.book Page 32 Friday, October 5, 2001 2:43 PM