Lanier AP4510, Setup Manual

Page: 298 / 424

NetWare Configuration
58
4
Setting Up a Client Computer
This section describes how to set up a client computer when using a NetWare
print server.
Note
❒
This section assumes that the client has NetWare client applications installed
and is correctly configured to communicate with a NetWare print server. If
not, install the necessary applications before starting the setting up proce-
dure.
Windows 95/98/Me
Follow the procedure to set up a Windows 95/98/Me client.
Preparation
Log on to the NetWare file server before starting the following procedure.
AAAA
Install the printer driver you want to use as “Local printer”.
Reference
For more information about installing the printer driver, see the Setup
Guide.
Note
❒
Any port can be selected during the installation, however, LPT1 is recom-
mended.
BBBB
Click [ Start ] , point to [ Settings ] , and then click [ Printers ] .
CCCC
In the [ Printers ] window, click the icon of the printer you want to use.
DDDD
On the [ File ] menu, click [ Properties ] .
EEEE
Click the
[ Details ]
tab, and then click
[ Add Port ]
.
FFFF
Click [ Network ] and click [ Browse ] .
GGGG
On the network tree, double-click the name of the file server.
The queues are displayed.
HHHH
Click the queue you want to print, and then click [ OK ] .
IIII
Click [ OK ] .
In the
[ Print to the following port ]
box, a network path to the printer appears.
JJJJ
Click [ OK ] to close the Printer Properties, and again, open it.