StorView RAID Module
78
7.7 Modifying a SAN LUN Mapping
In order to make changes to an existing SAN LUN Mapping, you must first remove the existing SAN LUN
Mapping and then re-create it with the changes.
Caution
Making changes to these mapping parameters may have an adverse affect on other mappings or to the
operating system accessing the logical drive.
1
From the Main screen click the
SAN Mapping
icon in the Tool Bar.
2
Select a Host HBA port under the “HBA Ports Name” section that contains the mapping to be modified.
3
Select the mapping to be modified from the “MAPPINGS” section.
Note
Make a note of the settings for this mapping to use in step 6.
4
Click the
REMOVE MAPPING
button.
5
You will receive a confirmation, click the
OK
button to continue, or
Cancel
to exit and return to the SAN
LUN Mapping window.
6
Add the new mapping. Follow the procedures to add a new mapping and refer to your notes from the
existing mapping to help create the new mapping. For specific details,
see 7.5 ”Creating a SAN LUN
Mapping” beginning on page 74.
Essentially you want to re-create the mapping except using the new settings you want for example a
different logical drive, a new LUN, different permissions and/or different controller host ports.
7
Click the
APPLY
button to save your changes.
Figure 7–7
SAN LUN Mapping Window (RS-1220-F4-5412E Shown)
Summary of Contents for 131018 - StorView Snapshot - Mac
