LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 31 / 214

Embedded StorView Setup
23
5 From the “Uninitialized” screen, select the MAC address of the embedded module you wish to configure.
If you wish to use a DHCP server to assign your IP address, click the check box “Use DHCP”.
If you wish to manually configure your network setting, enter the correction information in the appropriate
fields.
6 Enter a “new” password and confirm the new password. Click the Configure button.
7 If you have additional uninitialized embedded modules, select the next MAC address and choose the
appropriate settings from the previous steps.
Once you have completed configuring all the uninitialized embedded modules and have clicked the
Configure button, the wizard will display a pop-up message indicating all systems have been configured.
It will then re-scan for uninitialized systems and if none are found, you will be taken to the Initialized
screen. If someone plugs in a uninitialized system to the network (same subnet mask) during the time of
the rescan or resets a system’s password back to the defaults, you will be taken to the Uninitialized
screen again.
8 Select the MAC address of the embedded module you wish to start and click the Launch StorView button.
StorView will start up.
9 Your web browser will open with a login screen. Enter the login name and “new” password then click OK.
The StorView Main screen will open.
Figure 3–3 Configuration Screen
Figure 3–4 Launch Screen