StorView RAID Module
24
3.1.2 Configuring Network Settings via the CLI
From a Linux system using a command line interface (CLI), perform the following:
1
Log in as “root.”
2
Insert the Software & Manuals Disc into your CD drive.
3
Change directories to the software location. Type:
cd [CDROM mount point path]/software/storview/embedded
4
Execute the Setup Tool. From the command prompt, type:
./esvsetupcl-linux
Embedded StorView Setup Tool. v1.0
Entering Menu Mode.
5
Follow the on screen prompts. At the conclusion of the setup you will be instructed on how to proceed.
StorView will start within your web browser.
Note
Host-based StorView is started by launching your web browser and entering the IP address of the local
host followed by “:9292”. For more information, refer to the StorView Storage Management Software
RAID Module User’s Guide.
3.1.3 Configuring Network Settings within StorView
1
Click the
SETTINGS
button on the Main screen and select the
PREFERENCES
tab.
2
The StorView Server Name field will have a default name, “esv0” for Controller 0 and “esv1” for
Controller 1. If you wish to change this name, enter the desired name for this embedded StorView server.
Note
If the StorView server name displays “esverr,” this indicates a problem with the embedded StorView
server module. Contact technical support.
Figure 3–5
Settings Screen - Preference Tab (Dynamic IP Selected)
Summary of Contents for 131018 - StorView Snapshot - Mac
