LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 36 / 214

StorView RAID Module
28
If a remote login is attempted from another host system on the same network and you do not have a
global license, you will see a message displayed regarding this. You will have the option to upgrade your
license by entering your serial number and activation code. You can also upgrade your license from the
Other Servers section by clicking on the link in the notice displayed or the upgrade can be accessed by
clicking the Settings button (E-MAIL tab, default, presents an upgrade option when using a local or
remote access license).
Note Refer to your disc envelope to obtain the serial number and activation code.
1 Click on the “link” provided under “Other Servers.” The Settings window will open with the E-MAIL tab
selected. There you will enter the required information and click the
Activate button.
2 Once you have completed the upgrade, the window will reload with the E-MAIL, SYSLOG, and SNMP
tabs active. Click on the
CLOSE button in the confirmation window.
3 Click the CLOSE button on the Settings window.
4 You can verify the change by clicking the About button and noting that it now displays (Global), see
12.5.1 ”About” beginning on page 135.
Also the notice displayed under the Other Servers section will now be removed and any remote
discovered StorView Servers will be displayed.
License Features Version
Local Access Configuration, GUI Monitoring, and Event
Logs. Host-based
Remote Access All the features of Local, plus Remote Login
and Monitoring Failover. Embedded
Global Access All the features of Local and Remote, plus
E-Mail, SNMP, SYSLOG, and Other Servers
list. Host-based and Embedded
Figure 4–1 License Upgrade Screen