LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 177 / 214

Event Logs
169
14.6.7 StorView Server Events
Note These events are applicable to the host-based version only.
The following table provides a brief description of the events which relate to the StorView server software
component. The ID is given in the format of its hexadecimal value which is seen in Unix operating
systems and its equivalent decimal value in parenthesis which is seen in the Microsoft Windows
operating system.
StorView Server Event
Messages Type [ID] Cause Action
The server has been started. Information
[0x101 (257)] The StorView Server
started successfully. No action necessary.
The server has been
shutdown. Information
[0x102 (258)] The host is shutting down
or a user stopped the
StorView service. No action necessary.
A system rescan has been
initiated. Information
[0x103 (259)] The system rescan is
starting note: a shutdown
and start up event will
follow. No action necessary.
The serial number and key
entered are incorrect. Remote
features are temporarily
disabled. Error
[0x104 (260)] The serial number and
key specified in the
server settings file is not a
correct match. Open StorView in a
browser from the local
console, click the
Settings button. Re-enter
the serial number and
key. If you still have
problems, contact
technical support.
All event logs cleared. Information
[0x105 (261)] A user cleared the
StorView event logs. No action required.
A user < name > has updated
their password.
Information
[0x106 (262)] A specific user has
updated their password. No action required.
A user < name > from Host:
<host name>, IP Address:
<
IP_address > unsuccessfully
attempted to update their
password.
Information
[0x106 (262)] A specific user tried to
change the password but
verification failed or old
password failed. Ensure the user is
authorized or needs
assistance.
A user < name > has logged
into the Server from Host:
<host name>, IP Address:
<
IP_address >.
Information
[0x106 (262)] A specific user has
logged into the StorView
Server from the specified
host and IP address
location. No action required.