manualshive.com logo in svg

LaCie 131018 - StorView Snapshot - Mac, User Manual

Share
Download
LaCie 131018 - StorView Snapshot - Mac User Manual Download Page 133

Using Snapshot

125

11.4 Mapping a Snapshot

To make the snapshot of the logical drive available to the host, you will need to perform a SAN LUN 
Mapping of the snapshot. These snapshot logical drives or virtual logical drives will have read-only 
attributes.

Important

If you intend to make your Snapshots available as logical drives (Virtual LUNs (VLUN)), you must 
SAN LUN Map all logical drives. That includes regular logical drives and the snapshotted logical 
drives. 

1

From the Main screen click the 

SAN Mapping 

icon in the Tool Bar.

2

Select the Snapshot from the drop-down Logical Drive menu that you wish to map. 

Figure 11–10

Main Screen (RS-1220-F4-5412E Shown)

Figure 11–11

Selecting Snapshot to Map (RS-1220-F4-5412E Shown)

Summary of Contents for 131018 - StorView Snapshot - Mac























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands