LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 171 / 214

Event Logs
163
A rebuild was aborted on
(Array <
yy > Drive < ww >).
Information
[0xB73 (2931)] A rebuild was canceled
by the user. No action necessary.
SATA Drive Error: (Slot
<
number >) Information
<description>.
Error
[0xB75 (2933)] Drive or SATA link error. No action necessary.
A drive w/ SN <xxxxxxx> (Slot
<
nn >) has been removed.
Error
[0xB76 (2934)] A drive w/ WWN
<
xxxxxxxxxxxxxxxx > (Slot
< nn >, Enclosure < nn >)
has been removed.
No action necessary.
There was a bad block during a
rebuild on Array <
nn >, Drive
< mm >, LBA < xx xx xx xx xx
xx >, Block Count <xx>.
Warning
[0xB78 (2936)] A bad block was detected
during the rebuild
operation. Data loss will
occur with that data
stripe. Replace drive after
rebuild. Restore lost data
from a know good
backup.
An unsupported drive w/
(WWN <
xxxxxxxxxxxxxxxx > or
SN) <xxxxxxx> (Target ID
<
num >) has been inserted.
Error
[0xB7B (2939)] A SATA drive with an A/A
MUX Transition card was
installed in a system with
an older model controller
(RS-1220-F4-5402E). Replace the SATA drive
with one that has a A/P
MUX Transition card
installed.
< Array Name > is in an
unsupported configuration with
a mixture of A/P and A/A SATA
drives.
Error
[0xB8C (2956)] The array is marked
invalid because it
contains SATA drives
with a mix of Active-
Active and Active-
Passive MUX Transition
cards.
A SATA drive with an
Active-Active MUX
Transition card is used in
a RS-1220-F4-5402E
enclosure.
Replace the offending
drive with one that
contains a matching MUX
Transition card as the
remaining drive
members.
Replace the SATA drive
with the Active-Active
MUX Transition card to
one with an Active-
Passive MUX Transition
card.
Drive & Array Event
Messages Type [ID] Cause Action