LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 115 / 214

Managing the Storage Solution
107
4 Following the sequenced steps, click the Array Expansion Type pull-down menu, choose the type of
expansion applicable to your array.
5 Select the drives that will be used to expand the array.
6 Verify the changes you are about to make by examining the “Before Expansion” and “After Expansion”
analysis.
7 If your settings are correct, click the EXPAND button.
8 You will be prompted to confirm the Expand operation. Type your password and click the GO button.
9 You will receive a screen prompt that the command was successful, click the CLOSE button. If the
command was unsuccessful, review the settings for incorrect parameters and hardware for operational
status.
Figure 10–10 Expand Array Tab Selected
Figure 10–11 Expand Array Confirmation