LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 165 / 214

Event Logs
157
14.6.2 Expansion Module Events
These events are related to the expansion modules (Disk I/O or EBOD I/O module) reported by the SES
processor during updates. The ID is given in the format of its hexadecimal value which is seen in Unix
operating systems and its equivalent decimal value in parenthesis which is seen in the Microsoft
Windows operating system.
Expansion Module Event
Messages Type [ID] Cause Action
Disk I/O FW upgrade started
<
Enclosure <num> > < Total
Enclosure <num> > from
< current firmware version > to
< new firmware version >.
Information
[0xB7E (2942)] The firmware upgrade of the
Disk I/O or EBOD I/O module
firmware has started. The
process uploads the firmware
to the buffer on the controller
and starts the update on the
module. The update will
occur on all the Disk I/O or
EBOD I/O modules
connected to the controller.
At the end of the update
process, if the update
process is successful, the
RAID Controller and Disk I/O
or EBOD I/O module will be
reset. No action necessary.
Disk I/O FW upgrade finished
<
Enclosure <num> > < Total
Enclosure <num> > from < old
firmware version > to < new
firmware version >.
Information
[0xB7F (2943)] The firmware upgrade of the
Disk I/O - EBOD I/O module
firmware has completed
successfully. The RAID
Controller and Disk I/O or
EBOD I/O module will be
reset. No action necessary.
Disk I/O FW upgrade stopped
due to error. Error
[0xB80 (2944)] The firmware upgrade of the
Disk I/O EBOD I/O module
firmware has stopped
because the update process
has encountered an error.
However, the update process
will resend the firmware and
continue with the process
update. At the end of the
update process, if the update
process is successful, the
RAID Controller and Disk I/O
EBOD I/O module will be
reset. No action necessary.